Custom Bus & Truck Panels
(888) 402-1661
We bend body parts. When you see rust - think of us.

Thomas

Side Body Parts

Type what you are searching for


Part # T100

T100   3 ribbed panel. 27” T  X  90 1/2” L  plus 3/4" skirt bend. Conventional

Material: Cold Roll Etched

Part # T100T

T100T   3 ribbed panel. 34” T  X  90 1/2” L  plus 3/4" skirt bend. Transit

Material: Cold Roll Etched


Part # T101

T101  5 ribbed panel (Conventional and Transit) Middle of 2nd rub rail down. 18 1/2” T  X  90 1/2” L.

Material: Cold Roll Etched

Part # T102

T102  5 ribbed panel (Conventional)   27 1/2” T   X  90 1/2” L  plus skirt bend.

Material: Cold Roll Etched

Part # T103

T103   5 ribbed panel (Transit) 2nd rub rail down. 34” T  X  90 1/2” L  plus skirt bend. 

Material: Cold Roll Etched

Part # T104

T104  5 ribbed full panel (Conventional)  44” T  X  90 1/2” L  plus skirt bend.

Material: Cold Roll Etched


Part # T107

T107  Skirt  panel.  27” T  X  96” L  with 3/4" skirt bend.

Material: Galvanized

Part # T108

T108  Skirt panel.  15 1/4" T  X 96” L  with 3/4" skirt bend.

Material: Galvanized

Part # C2-108A

C2-108A  C2 body Skirt panel. 15 7/8”T  X  96”L with 5/8” skirt bend. Cut down in to lengths of numerous skirt panels. Made for 2006-2012 models. May vary depending on model build date. Check dimensions.   

Material: Galvanized

Part # C2-108B

C2-108B  C2 body Skirt panel. 16 7/8”T  X  96”L with 5/8” skirt bend. Cut down in to lengths of numerous skirt panels.  Made for 2013-2018 models. May vary depending on model build date. Check dimensions.  

Material: Galvanized


Part # T109L

T109L    Left rear side flat panel. Made for a transit body. 76 1/2"L  X  34" T at front of panel.17 1/2" at tail of panel. plus skirt bend.

Material: Galvanized

Part # T109R

T109R    Right rear side flat panel. Made for a transit body. 76 1/2"L  X  34" T at front of panel.17 1/2" at tail of panel. plus skirt bend.

Material: Galvanized


Part # T114

T114  Wheel Well Ring (Conventional) 18 1/2"T at middle of arch. 47 1/2"W ID. 1 1/2" Face. Ridge on back side. NOTE: For Conventional Buses with luggage boxes under body use T120 Transit Wheel Well Ring

Part # T120

T120  Wheel Well Ring (Transit) 24 1/2"T at middle of arch. 49 1/2"W ID. 1 1/2" Face. Ridge on back side. NOTE: For Conventional Buses with luggage boxes under body use T120 Transit Wheel Well Ring

Part # T122

T122  Wheel well ring. Flat side panel (non ribbed)  49 3/8"W ID  X  24 1/2"T in middle to arch. 1 3/8"W on face. 3/4" 90* lip on back.  

Material: Galvanized


Part # T121

T121  Side Rib Bows. Replacement bows behind exterior side panels

Material: Galvanized


Part # T123

T123   Rub Rail 8 ft. Does not fit C-2 body.

Material: Galvanized

Part # T200

T200   Rub Rail Splice. 8" Long. We made our own version of the splice. We think ours fits better than the Thomas splice. Can be cut to make multiple splices.

Material: Galvanized

Part # T210

T210   Rub Rail End Cap. 5" L. We made ours to fit over the rub rail.

Material: Galvanized


Part # T124

T124  Inner Panel Ring Conventional or Transit. Cut to fit. 1 3/8" Wide Lip

Material: Galvanized


Part # T124B

T124B  Inner Panel Ring Conventional or Transit. Cut to fit. 5" Wide Lip to to repair damage deeper inside wheel well. 

Material: Galvanized


Part # T208R

T208R  (Transit) Right side skirt panel angled to bumper. 76 1/2" L  X  20 3/8" T. Tapers to 12 3/8"  at end of panel.

Material: Galvanized

Part # T208L

T208L  (Transit) Left side skirt panel angled to bumper. 76 1/2" L  X  20 3/8"T. Tapers to 12 3/8" at end of panel.  

Material: Galvanized